Used Haas DM-2

1-1 of 1
1-1 of 1

What a standard Haas DM-2 comes equipped with

  • 28″ x 16″ x 15.5″ Travels (X, Y, Z)
  • CAT 40 Taper Inline Direct-Drive Spindle
  • 15,000 RPM Spindle
  • 18-Pocket Side-Mount Tool Changer
  • 15 HP Vector Drive
  • 2,400 IPM Rapids
  • Rigid Tapping to 5,000 RPM
  • Chip Auger
  • Haas CNC Control

Available upgrades for the DM-2 CNC models

A user may upgrade from standard features and specifications including:

  • 300 PSI Through-Spindle Coolant
  • Fourth Axis, wired or with a rotary table fitted
  • Fifth-Axis Trunnion Table
  • Wireless Intuitive Probing System (WIPS)
  • High-Speed Machining
  • HaasConnect Remote Monitoring
  • Ethernet and Wi-Fi with Expanded Program Memory, and many more!

Does the DM-2 have different models?

In addition to customizing features and specs, Haas Automation offers other machines in the drill and mill range:

  • Haas DM-1 is the shorter machine, identical in construction but with 8″ less travel in X.
  • Haas DT-1 and DT-2 are the 30-taper drill and tap machines. The lighter BT-30 spindle changes tools faster; the 40-taper DM takes the heavier cut.
  • Haas VF-2 is the general-purpose 40-taper vertical machining center at a similar table size, built for cutting rather than for speed between holes.

When considering a used Haas DM-2, the machine is bought for speed in a 40-taper package, and on the used market that is nearly always what you get: almost every one we have handled runs the 15,000 RPM spindle rather than the slower option. Through-spindle coolant at 300 psi is the option worth confirming, because it appears on a good share of the machines we see and it is expensive to add afterwards. Fourth-axis wiring is common too, and is worth having even if no rotary table comes with the machine.

Popular Haas Models:

VF Series:

UMC Series:

ST Series:

TL Series:

TM Series:

Drill and Tap Machines:

EC Series: