Used CMM Machines for Sale

Buying a used coordinate measuring machine

Three things decide whether a used CMM fits your shop: measuring volume, stated accuracy, and the probe head.

Measuring volume is the X, Y and Z travel. It needs to clear your largest part with room for fixturing, not merely fit it.

Accuracy is published as a length-measurement error in the form A + L/K micrometres, per ISO 10360. On a used machine, treat that as a starting point rather than a promise: it assumes a stable floor and a temperature-controlled room, and it should be re-verified after the move.

The probe head matters as much as the frame. A touch-trigger head is the economical choice for prismatic parts and hole patterns; a scanning head costs more and is what you need for form, profile and surface work. Retrofitting a different head later is rarely cheap.

Bridge machines cover most general inspection. Horizontal-arm and gantry machines suit large weldments and sheet-metal assemblies. Portable arms and laser trackers trade absolute accuracy for the ability to measure parts that cannot be moved.

Two things buyers most often miss: whether the metrology software licence transfers with the machine, and whether the original probe kit and styli are included.

KD Machinery stocks used CMMs from Zeiss, Hexagon (including Leitz and Romer), Brown & Sharpe, Keyence, Mitutoyo, Faro, Nikon, Sheffield and Tesa.

Coordinate Measuring Machines

Advanced Filters

Recently Sold

Buying a used coordinate measuring machine