Used Doosan Puma Series

KD Machinery and the Doosan Puma

We have handled 40 Doosan Puma machines, spanning build years 2005 to 2023. That is our own record, not a catalog listing.

The most common Doosan Puma we have handled is the Puma 2600SY — 4 of the 40 machines.

The Doosan Puma variants we have handled

Puma 2600SY — 4 of 40
Puma 2600SY II — 2 of 40
Puma 4100LB — 2 of 40
Puma 280L — 2 of 40
Puma 300LC — 2 of 40
Puma 1500SY — 1 of 40
Puma 2600Y — 1 of 40
Puma 700LM — 1 of 40

Plus 25 in less common variants.

Specifications, from the machines we have handled

Chuck Size	10" (13 of 40), 12" (8 of 40), 8" (5 of 40), and 14 others
Bar Capacity	3" (10 of 40), 3.2" (4 of 40), 4.05" (4 of 40), and 22 others
Swing	30.7" (6 of 40), 40.55" (5 of 40), 24.8" (3 of 40), and 22 others
Turning Diameter	14.8" (5 of 40), 35.4" (4 of 40), 16.5" (3 of 40), and 28 others
Distance Between Centers	29.9" (6 of 40), 126" (4 of 40), 29" (2 of 40), and 27 others
X-Axis Travel	10.2" (1 of 40), 9.84” (1 of 40), 8.07" (1 of 40)
Y-Axis Travel	4.1" (1 of 40), 4.0” (± 2.0”) (1 of 40)
Z-Axis Travel	22.8” (1 of 40), 22.83" (1 of 40)
Spindle Speed	3,500 RPM (7 of 40), 4,000 RPM (6 of 40), 2,800 RPM (5 of 40), and 22 others
Spindle Motor	30 HP (3 of 40), 35 HP (1 of 40), 50 HP (1 of 40), and 1 other
Turret	12 Station (36 of 40), (12) Upper/ (8) Lower (1 of 40), 10 Station (1 of 40), and 1 other
Control	Fanuc (5 of 40), Fanuc CNC (4 of 40), Fanuc i Series (4 of 40), and 26 others
Power Requirement	200/220V/ 3 PH/ 50/60Hz (1 of 40), 220V (1 of 40), 220/3ph (1 of 40)

What we have listed Doosan Puma machines at

Across 126 Doosan Puma machines we have listed with a published price, the middle half ran from $59,500 to $169,900, with a median of $99,750. A quarter were listed below that band and a quarter above it. These are the prices we asked, not what any machine changed hands for — condition, hours, tooling and control generation move a machine within it. Ask us where a specific one sits.

Questions buyers ask

How much does a used Doosan Puma cost?

Across 126 Doosan Puma machines KD Machinery has listed with a published price, the middle half ran from $59,500 to $169,900, with a median of $99,750. A quarter were listed below that band and a quarter above it. These are the prices we asked, not what any machine changed hands for — condition, hours, tooling and control generation move a machine within it.

Which Doosan Puma variant is most common?

Of the 40 Doosan Puma machines KD Machinery has handled, the most common variants are Puma 2600SY (4), Puma 2600SY II (2), Puma 4100LB (2), Puma 280L (2), Puma 300LC (2). That is our own record of what has actually come through, not a catalog of everything the manufacturer built.

Before you buy

Getting one inspected

We always strongly recommend an inspection before you buy. KD does not perform it ourselves — the inspection is done by you, by a third-party technician, or by the OEM.

We have a network of 3rd party techs whom we can recommend. Most buyers are looking at a machine in another state or across the country, and sending a tech who is already nearby saves the travel time and cost of going to see it yourself.

An inspection on a lathe typically covers the way covers, the chuck and jaws, the tailstock, turret indexing, coolant condition and ballscrew backlash.

Spindle hours are worth confirming rather than taking from a listing, because an hours meter can be reset. A high-hour machine that has been maintained regularly is a lot better than a lower-hour machine that has been neglected.

Buy the options from the factory

We would not recommend buying a machine and adding options later. It is very expensive to do so if it did not come out of the factory with those options.

That applies to live tooling, a tailstock, a sub-spindle, high-pressure coolant, a tool presetter, a parts catcher and a chip conveyor. The parts catcher and the chip conveyor look like bolt-ons and are not — they are hard and expensive to add after the fact.

A bar feeder is the exception. That one can be added at a reasonable expense.

Clear title

KD runs lien searches on every transaction so that our buyers can have peace of mind that they are purchasing an asset that does not have any active liens on it. We take this very seriously and are willing to pass up a deal if the seller won't cooperate on getting active liens cleared.

Where to buy a used Doosan Puma

KD Machinery buys, sells and brokers used machinery nationwide. We have 10 used Doosan Puma available now, listed on this page. We have handled 40 of them, built between 2005 and 2023.

Our office is in Scottsdale, Arizona, but the machines are not. They sit wherever the seller is, across the United States, and most buyers are looking at one in another state or across the country. We arrange inspection and rigging wherever a machine stands.

Call 480.922.1674, email customerservice@kdmachinery.com, or use the quote form on any machine above. We will tell you where a specific one sits on price, what condition it is in, and can put you in touch with an inspector near it.

Doosan Puma machines KD has sold

KD Machinery has bought and sold 30 Doosan Puma machines built between 2005 and 2023.

Showing the 24 most recent. 6 machines are not listed here.

Reviewed by Shannon Treger, 480-922-1674. Last reviewed 20 August 2026.