In a Toshiba model string such as ISG390V10-19B, the number after the series letters is the clamp tonnage on KD Machinery’s listings and the V number names the Injectvisor control. KD Machinery buys and sells used Toshiba injection molding machines, from 20-ton EC presses to a 2,750-ton two-platen machine, built from 1994 to 2023.
180 Ton 11.5 oz Shot Size Injection Molding Machine
Ref # 8079283A Toshiba model string packs three things together. The tonnage comes first, so an ISG390 is listed at 390 tons and an EC85 at 85, and the V and its number follow, so an ISG390V10 has the V10 control. Every Toshiba KD Machinery has described as wide-platen has a W after the tonnage, as in ISGT950W, though not every W machine is described that way. The part after the dash is not the shot size, so read that from the listing.
The two families on KD Machinery’s record split by design and by years. The EC machines, built from 1999 to 2023, are mostly listed as electric and run from 20 to 610 tons. The ISG, ISGS and ISGT machines were built from 1996 to 2010 and none of them is listed as electric. The ISGS and ISGT run larger, mostly 310 tons and up, and the ISF machines on the record reach 2,750 tons. An electric press and a conventional one of the same tonnage are different machines to run and to check, so compare like with like.
The control dates the machine. On KD Machinery’s record, the V10 is on machines built from 1996 to 2002, the V21 from 2000 to 2010, the V30 from 2006 to 2010, and the V50 from 2010 to 2018. Ask for the control’s condition and spare boards, and whether the screen has been replaced.
Many of these presses are more than fifteen years old on KD Machinery’s record, so ask for the hours and the service history; some listings give a figure and some note a screw and barrel replaced. Cycle the clamp to full open and check the platens for parallel. Watch for leaks at the clamp and injection cylinders on ISG-family machines, and ask about the servo drives on EC machines. Confirm core pulls, air blow and the robot interface work, since most machines on the record have them.
The Toshiba manufacturer page also lists the Toshiba machine tools left off this page. For other presses, see used Nissei injection molding machines, used Van Dorn injection molding machines or every make under used injection molding machines.
We have handled 66 Toshiba Injection Molding machines, spanning build years 1995 to 2018. That is our own record, not a catalog listing.
The most common Toshiba Injection Molding we have handled is the ISG390V10-19B — 5 of the 66 machines.
Plus 48 in less common variants.
| Capacity | 390 Ton (13 of 66), 110 Ton (6 of 66), 250 Ton (6 of 66), and 41 others |
|---|---|
| Control | Injectvisor V10 (20 of 66), Injectvisor V21 (11 of 66), V21 (11 of 66), and 22 others |
| Power Requirement | 220V (5 of 66), 460/230 Presently Operating 208 Volt (3 of 66), 230V (2 of 66), and 5 others |
Across 72 Toshiba Injection Molding machines we have listed with a published price, the middle half ran from $19,500 to $59,500, with a median of $34,500. A quarter were listed below that band and a quarter above it. These are the prices we asked, not what any machine changed hands for — condition, hours, tooling and control generation move a machine within it. Ask us where a specific one sits. Asking prices as of November 2026.
It names the Injectvisor control. On KD Machinery's record, the V10 is on machines from 1996 to 2002, the V21 from 2000 to 2010, the V30 from 2006 to 2010 and the V50 from 2010 to 2018. The number before it is the clamp tonnage.
Most of the EC machines KD Machinery has listed are described as electric. None of the ISG, ISGS or ISGT machines on its record is. Read the description of the machine you are looking at to be sure.
Across 72 Toshiba Injection Molding machines KD Machinery has listed with a published price, the middle half ran from $19,500 to $59,500, with a median of $34,500. A quarter were listed below that band and a quarter above it. These are the prices we asked, not what any machine changed hands for — condition, hours, tooling and control generation move a machine within it. Asking prices as of November 2026.
Of the 66 Toshiba Injection Molding machines KD Machinery has handled, the most common variants are ISG390V10-19B (5), EC85NV21-2 (3), EC85SXV50-2 (2), EC180NIIV21-4B (2), EC65NII V30-1.5A (2). That is our own record of what has actually come through, not a catalog of everything the manufacturer built.
KD runs lien searches on every transaction so that our buyers can have peace of mind that they are purchasing an asset that does not have any active liens on it. We take this very seriously and are willing to pass up a deal if the seller won't cooperate on getting active liens cleared.
KD Machinery has bought and sold 65 of the 66 Toshiba Injection Molding machines it has handled; the ones sold were built between 1995 and 2018.
Showing the 24 most recent. 41 machines are not listed here.
KD Machinery buys the Toshiba Injection Molding Machines and other used machines outright. Tell us what you have and how to reach you, and we will get back to you. The make and model are enough to start.
How it works and what we buy: Sell your machines.
KD Machinery buys single machines, and whole shops and plants, outright. Auction-based plant liquidations and formal USPAP appraisals are handled by KD Auctions: see plant liquidation by auction and USPAP appraisals.
