KD Machinery and the Flow Mach 3
We have handled 50 Flow Mach 3 machines, spanning build years 2008 to 2016. That is our own record, not a catalogue listing.
The most common Flow Mach 3 we have handled is the Mach 3 4020b — 23 of the 50 machines.
Specifications, from the machines we have handled
| Z-Axis Travel | 8" (2 of 50), 7" (1 of 50) |
|---|---|
| Table Length | 13.1' (25 of 50), 13' (4 of 50), 8' (4 of 50), and 17 others |
| Table Width | 6.6' (26 of 50), 6.5' (8 of 50), 4.2' (6 of 50), and 10 others |
| Control | Flowmaster (18 of 50), Flow PC Based (14 of 50), Flowmaster PC Based (5 of 50), and 13 others |
| Power Requirement | 460-480/3/60 (15 of 50), 460/3/60 (11 of 50), 480/3/60 (11 of 50), and 1 other |
What we have listed Flow Mach 3 machines at
Across 48 Flow Mach 3 machines we have listed with a published price, the range ran from $14,990 to $124,975. These are the prices we asked, not what any machine changed hands for — condition, hours, tooling and control generation move a machine within that band. Ask us where a specific one sits.
Before you buy
Which Mach fits the work?
There is no simple rule that puts a buyer on one Mach rather than another. It really depends on the size, type and thickness of the material, and what you are trying to make.
The pump is the machine
Do a minor pump rebuild when you get the pump. That way you start tracking the hours yourself and get a good idea of the intervals between rebuilds.
Hours on pumps are highly unreliable, but even pumps with over 10,000 hours are still good pumps, because by that time most big ticket items have most likely already been replaced.
What looks bad, and what is bad
Dirty tanks and slats are part of owning a waterjet. Slats in particular are maintenance items and need to be replaced periodically.
The cutting head, orifice and mixing tube are maintenance items too, with an hourly lifespan that depends on what you buy. A diamond jewel will last hundreds of hours, where a ruby or sapphire jewel will only last 20 to 40.
Getting one inspected
We always strongly recommend an inspection before you buy. KD does not perform it ourselves — the inspection is done by you, by a third-party technician, or by the OEM.
We have a network of 3rd party techs whom we can recommend. Most buyers are looking at a machine in another state or across the country, and sending a tech who is already nearby saves the travel time and cost of going to see it yourself.
Clear title
KD runs lien searches on every transaction so that our buyers can have peace of mind that they are purchasing an asset that does not have any active liens on it. We take this very seriously and are willing to pass up a deal if the seller won't cooperate on getting active liens cleared.
Flow Mach 3 machines KD has sold
KD Machinery has bought and sold 45 Flow Mach 3 machines built between 2008 and 2016.
Showing the 24 most recent. 21 machines are not listed here.
- 2016 Flow Mach 3 3020b
- 2015 Flow Mach 3 1313b
- 2014 Flow Mach 3 3020b
- 2011 Flow Mach 3 2513b
- 2012 Flow Mach 3 4020b
- 2009 Flow Mach 3 4020b
- 2010 Flow Mach 4 4020b
- 2013 Flow Mach 3 4020b
- 2014 Flow Mach 3 2513b
- 2015 Flow Mach 3 4020B
- 2016 Flow Mach 3 4020b DWJ
- 2010 Flow Mach 3 612
- 2013 Flow Mach 3 4020b-X5
- 2012 Flow Mach 3 4020b DWJ
- 2012 Flow Mach 3 4020b
- 2015 Flow Mach 3 4020b
- 2013 Flow Mach 3 4020b
- 2009 Flow Mach 3 1313b
- 2013 Flow Mach 3 4020b
- 2015 Flow Mach 3 4020b
- 2013 Flow Mach 3 4020b X5
- 2013 Flow Mach 3 1313b
- 2013 Flow Mach 3 4020b-X5
- 2014 Flow Mach 3 2513b