KD Machinery and the Okuma Genos
We have handled 12 Okuma Genos machines, spanning build years 2014 to 2022. That is our own record, not a catalog listing.
The most common Okuma Genos we have handled is the Genos M560-V — 3 of the 12 machines.
The Okuma Genos variants we have handled
- Genos M560-V — 3 of 12
- Genos L300MYW — 1 of 12
- Genos L400 — 1 of 12
- Genos L400E — 1 of 12
- Genos L300-MYW-e — 1 of 12
- Genos L200E-M-e — 1 of 12
- Genos M660-V — 1 of 12
- Genos M460V-5AX — 1 of 12
Plus 2 in less common variants.
Specifications, from the machines we have handled
| Chuck Size | 10" (6 of 12), 8" (1 of 12) |
|---|---|
| Bar Capacity | 2.75" (2 of 12), 2.6" (2 of 12), 3" (1 of 12), and 2 others |
| Swing | 20.4" (2 of 12), 20.47" (1 of 12), 22.8" (1 of 12) |
| Turning Diameter | 11.81" (2 of 12), 13.39" (2 of 12), 15.3" (1 of 12), and 2 others |
| Distance Between Centers | 19.69" (2 of 12), 16" (1 of 12), 22" (1 of 12), and 3 others |
| X-Axis Travel | 41.34" (3 of 12), 59.1" (1 of 12), 30" (1 of 12) |
| Y-Axis Travel | 22.05" (3 of 12), 25.98" (1 of 12), 18.11" (1 of 12) |
| Z-Axis Travel | 18.11" (4 of 12), 25.98" (1 of 12) |
| Spindle Speed | 3,000 RPM (5 of 12), 15,000 RPM (5 of 12), 3800 RPM (1 of 12), and 1 other |
| Spindle Taper | CAT 40 (4 of 12), CAT 40 Big Plus (1 of 12) |
| Spindle Motor | 15 HP (1 of 12), 30 HP (1 of 12), 22 HP (1 of 12) |
| Tool Magazine Capacity | 32 ATC (3 of 12), 30 ATC (1 of 12), 48 ATC (1 of 12) |
| Turret | 12 Station (7 of 12) |
| Control | Okuma OSP (6 of 12), OSP300LA (2 of 12), Okuma OSP-P300LA-e (1 of 12), and 1 other |
| Power Requirement | 34KVA (1 of 12), 34 KVA (1 of 12) |
What we have listed Okuma Genos machines at
Across 37 Okuma Genos machines we have listed with a published price, the middle half ran from $59,500 to $92,500, with a median of $79,750. A quarter were listed below that band and a quarter above it. These are the prices we asked, not what any machine changed hands for — condition, hours, tooling and control generation move a machine within it. Ask us where a specific one sits.
Questions buyers ask
How much does a used Okuma Genos cost?
Across 37 Okuma Genos machines KD Machinery has listed with a published price, the middle half ran from $59,500 to $92,500, with a median of $79,750. A quarter were listed below that band and a quarter above it. These are the prices we asked, not what any machine changed hands for — condition, hours, tooling and control generation move a machine within it.
Which Okuma Genos variant is most common?
Of the 12 Okuma Genos machines KD Machinery has handled, the most common variants are Genos M560-V (3), Genos L300MYW (1), Genos L400 (1), Genos L400E (1), Genos L300-MYW-e (1). That is our own record of what has actually come through, not a catalog of everything the manufacturer built.
Before you buy
Clear title
KD runs lien searches on every transaction so that our buyers can have peace of mind that they are purchasing an asset that does not have any active liens on it. We take this very seriously and are willing to pass up a deal if the seller won't cooperate on getting active liens cleared.
Where to buy a used Okuma Genos
KD Machinery buys, sells and brokers used machinery nationwide. We have 3 used Okuma Genos available now, listed on this page. We have handled 12 of them, built between 2014 and 2022.
Our office is in Scottsdale, Arizona, but the machines are not. They sit wherever the seller is, across the United States, and most buyers are looking at one in another state or across the country. We arrange inspection and rigging wherever a machine stands.
Call 480.922.1674, email customerservice@kdmachinery.com, or use the quote form on any machine above. We will tell you where a specific one sits on price, what condition it is in, and can put you in touch with an inspector near it.
Okuma Genos machines KD has sold
KD Machinery has bought and sold 9 Okuma Genos machines built between 2017 and 2022.