KD Machinery and the Fanuc Robodrill
We have handled 18 Fanuc Robodrill machines, spanning build years 2007 to 2021. That is our own record, not a catalog listing.
The most common Fanuc Robodrill we have handled is the Robodrill a-D21MiB5 — 3 of the 18 machines.
The Fanuc Robodrill variants we have handled
- Robodrill a-D21MiB5 — 3 of 18
- Robodrill D21LiB5 — 3 of 18
- Robodrill Alpha D21LiB5 — 2 of 18
- Robodrill a-D14MiB — 2 of 18
- Robodrill a-D21MiA5 — 2 of 18
- Robodrill aD21LiB5 — 1 of 18
- Robodrill a-D21MiB5adv — 1 of 18
- Robodrill D21MiB5 — 1 of 18
Plus 3 in less common variants.
Specifications, from the machines we have handled
| X-Axis Travel | 19.7" (6 of 18), 27.55" (5 of 18), 19.68" (3 of 18), and 4 others |
|---|---|
| Y-Axis Travel | 15.7" (6 of 18), 15.74" (4 of 18), 15.748" (3 of 18), and 5 others |
| Z-Axis Travel | 12.99" (8 of 18), 12.9" (5 of 18), 13" (3 of 18), and 2 others |
| Spindle Speed | 24,000 RPM (10 of 18), 10,000 RPM (8 of 18) |
| Spindle Taper | BT 30 (18 of 18) |
| Spindle Motor | 14.75 HP (2 of 18), 15 HP (1 of 18) |
| Tool Magazine Capacity | 21 ATC (15 of 18), 14 ATC (3 of 18) |
| Control | Fanuc CNC (4 of 18), Fanuc 31i B5 (3 of 18), Fanuc 31I Control (2 of 18), and 8 others |
| Power Requirement | 220V (2 of 18) |
What we have listed Fanuc Robodrill machines at
Across 33 Fanuc Robodrill machines we have listed with a published price, the middle half ran from $27,500 to $84,900, with a median of $57,500. A quarter were listed below that band and a quarter above it. These are the prices we asked, not what any machine changed hands for — condition, hours, tooling and control generation move a machine within it. Ask us where a specific one sits.
Questions buyers ask
How much does a used Fanuc Robodrill cost?
Across 33 Fanuc Robodrill machines KD Machinery has listed with a published price, the middle half ran from $27,500 to $84,900, with a median of $57,500. A quarter were listed below that band and a quarter above it. These are the prices we asked, not what any machine changed hands for — condition, hours, tooling and control generation move a machine within it.
Which Fanuc Robodrill variant is most common?
Of the 18 Fanuc Robodrill machines KD Machinery has handled, the most common variants are Robodrill a-D21MiB5 (3), Robodrill D21LiB5 (3), Robodrill Alpha D21LiB5 (2), Robodrill a-D14MiB (2), Robodrill a-D21MiA5 (2). That is our own record of what has actually come through, not a catalog of everything the manufacturer built.
Before you buy
Getting one inspected
We always strongly recommend an inspection before you buy. KD does not perform it ourselves — the inspection is done by you, by a third-party technician, or by the OEM.
We have a network of 3rd party techs whom we can recommend. Most buyers are looking at a machine in another state or across the country, and sending a tech who is already nearby saves the travel time and cost of going to see it yourself.
An inspection on a machining center goes through the major components: the tool changer, the guides, the way covers, drawbar pressure, motion in all axes, and the spindle running at both low and high rpm.
Spindle hours are worth confirming rather than taking from a listing, because an hours meter can be reset. A high-hour machine that has been maintained regularly is a lot better than a lower-hour machine that has been neglected.
Buy the options from the factory
We would not recommend buying a machine and adding options later. It is very expensive to do so if it did not come out of the factory with those options.
A 4th or 5th axis is the exception, and the only option worth adding afterwards. Everything else is either not easy to do, not possible at all, or would simply cost more than it is worth.
Clear title
KD runs lien searches on every transaction so that our buyers can have peace of mind that they are purchasing an asset that does not have any active liens on it. We take this very seriously and are willing to pass up a deal if the seller won't cooperate on getting active liens cleared.
Where to buy a used Fanuc Robodrill
KD Machinery buys, sells and brokers used machinery nationwide. We have 6 used Fanuc Robodrill available now, listed on this page. We have handled 18 of them, built between 2007 and 2021.
Our office is in Scottsdale, Arizona, but the machines are not. They sit wherever the seller is, across the United States, and most buyers are looking at one in another state or across the country. We arrange inspection and rigging wherever a machine stands.
Call 480.922.1674, email customerservice@kdmachinery.com, or use the quote form on any machine above. We will tell you where a specific one sits on price, what condition it is in, and can put you in touch with an inspector near it.
Fanuc Robodrill machines KD has sold
KD Machinery has bought and sold 12 Fanuc Robodrill machines built between 2007 and 2021.
- 2021 Fanuc Robodrill a-D21MiB5adv
- 2008 Fanuc Robodrill T21iF
- 2021 Fanuc Robodrill a-D14MiB
- 2021 Fanuc Robodrill a-D21MiB5
- 2021 Fanuc Robodrill a-D14MiB
- 2018 Fanuc Robodrill D21LiB5
- 2018 Fanuc Robodrill D21LiB5
- 2018 Fanuc Robodrill D21LiB5
- 2007 Fanuc Robodrill Mate
- 2015 Fanuc Robodrill a-D21MiA5
- 2015 Fanuc Robodrill a-D21MiA5
- 2008 Fanuc Robodrill a-T21iFL